The Most Active and Friendliest
Affiliate Marketing Community Online!

“AdsEmpire”/  Direct Affiliate

AdsBridge tracking with affiliate networks based on PeerFly's platform

A

Alex AdsBridge

Guest
Final update on how to set up tracking with affiliate networks on different platform is here.

We hope you’ll find this information useful and apply to your campaigns.
So, get strarted and set it up!



1. Copy the offer link.

151.jpg


Paste it into the URL field when creating an offer:

16eng1.jpg


2. Add the <tid> macro to the URL by marking the “Tracking Sub ID” checkbox, and typing the parameter name into the field.

The parameters you can use are: s1, s2, s3. In our example we will use s1.

17eng1.jpg


3. In the offer settings press the Tools-Setup Postback button. You will be redirected to the page for adding the postback URL.

181.jpg


Paste the S2S postback URL which you have copied from the “Tracking pixel” section on AdsBridge right here:

191.jpg


4. The list of macros which you can use is displayed at the top of this field.

You can use the following macros to pass the click ID back to the tracker: %subid1%, %subid2%, %subid3%.

To transmit the dynamic payout on each conversion, use the %comission% macro. Thus, the S2S postback URL will look like this:
http://ovlw.adsb4all.com/trackpixel/track?tid=%subid1%&amt=%comission%

201.jpg



Such setting enables the successful passing of conversions from the PeerFly affiliate network to AdsBridge.

PLEASE NOTE: The Cake and Hasoffers platforms have the Global postback functionality which is set for the whole account. This postback is triggered first. In this article the setting of the postback is applied on a specific offer. This postback has a lower priority. If in the Global postback and in the postback for a specific offer you use different parameters and macros, the conversions may not track. In this case it is better to contact your affiliate manager.

The setting of the Global postback is done in the same way. When using it you will need to apply the same settings for all offers of this affiliate network.

As you see, the setting algorithm is quite simple, and it takes less than 5 minutes. When setting the tracking with affiliate networks in such a way, you will no longer have problems, and will save time on the working process.

Wish you high conversions!
 
Last edited by a moderator:
Thank you Alex. Why here is s1 not subid1? :)

There for sure have to be s1. When you set up tracking conversions on different platforms, each has its own settings, we have shown an example on PeerFly's platform.
 
There for sure have to be s1. When you set up tracking conversions on different platforms, each has its own settings, we have shown an example on PeerFly's platform.
Thanks. And can you show an example of tracking keyword from Bing Ads?
I can't see my KWs in my AdsBridge report.. :(
 
@Alex_099 Is there any token value to track the cost of how much the bid cost of keywords on Bing ?

Thanks. And can you show an example of tracking keyword from Bing Ads?
I can't see my KWs in my AdsBridge report.. :(

I hope this can help you, just put {QueryString} on the Token Value

Here my Bing Ads Setup & The Traffic Reports
52Jds7O.png
 
@Alex_099 Is there any token value to track the cost of how much the bid cost of keywords on Bing ?



I hope this can help you, just put {QueryString} on the Token Value

Here my Bing Ads Setup & The Traffic Reports
52Jds7O.png
Hey @agungwe ,

Here is the list of known Bing tokens:
{AdGroupId} Adgroup ID that triggered the ad

{AdId} Ad ID of the displayed ad

{BidMatchType} Match type of the bid (e=bidded exact p=bidded phrase b=bidded broad c=bidded content)

{CampaignId} Campaign ID that triggered the ad

{Device} Device type of where the click came from m=mobile t=table device c=desktop or laptop computer)


{IfContent:string}
The string text (that you define) to the right of the colon if the ad is displayed on the content network


{IfMobile:string}
The string text (that you define) to the right of the colon if the ad is displayed on a mobile device

{IfNative:string} The string text (that you define) to the right of the colon will be substituted into the URL if the ad is displayed as a native ad

{IfSearch:string} The string text (that you define) to the right of the colon if the ad is displayed on the search network

{MatchType} Match type that triggered the ad (e=exact p=phrase b=broad c=content)

{OrderItemId} Keyword ID that triggered the display of the ad

{ProductId} ID of the product that triggered the ad (Bing merchant center for product ads only)

{QueryString} Search query text that the visitor entered

{TargetId} Target ID of the keyword ("kwd") or remarketing list ("aud") that triggered the ad

The onle BID related token in the list is {BidMatchType}.
I think the best option is to ask their rep about the needed token, as we don't know if there is token for bid cost of keywords on Bing.

Hope this info will help you somehow :)
 
MI
Back