The Most Active and Friendliest
Affiliate Marketing Community Online!

“AdsEmpire”/  Direct Affiliate
Might.io - Performance Tracker

Official Might.io - Performance Tracker

might_io

Service Manager
Service Manager
Might.io - Performance Tracker
might_io submitted a new resource:

Might.io - Performance Tracker - Right Choice of Performance Tracking Software

Powerful reporting
Get On-the-Fly reports are updated in real time, see everything important to you in report section instantly. Truly flexible analytics help to discover insights that were hidden before. No limits at all - play with stats in any way you want.

2.png


1ms redirect latency
We’re obsessed with speed. The core of the platform is written in C ++.

11 datacenters
Quick ping to each server in...

Read more about this resource...
 
Hello there,

Today we are rolling out a new update, which we would like to talk about in more detail.

1. Based on the comments of our users, we added the option to choose auto cost when setting up a campaign in the cost section, if there is an appropriate token in the traffic source. Also you have the option to specify CPC or CPM depending on what price the traffic source sends.

autoprice.png


2. Now we have Labels for custom parameters. You can click on the appropriate parameters and assign them one of five labels. List of parameters for each label is available by clicking on the Label list. This functionality is designed to simplify the work with white & block lists.

label2.gif


3. Customization of statuses for leads was added. In the affiliate network settings you can assign the values of the «type» parameter for the postback, which will correspond to one of the three statuses in our system.

status.png

4. We’ve improved zooming for our charts. Now time interval changes during zooming.

zoom2.gif


Please don't hesitate to reach out to our 24/7 support team!

We're always here to help you!
 
Last edited:
New version of Might.io tracker is out.

This version provides a major improvement on redirect nodes, campaign management and new options for tracking without redirects.

  1. Due to popular request, we've added functionality for flows. Now you can use saved flows in your campaigns and see reports by flow/rule/path without any limitations.
  2. We've added archives for entities. Now you can keep your reports clean from old data, but you'll be able to get access to this old data anytime.
  3. Redirect nodes have been rewritten to optimize rule processing. Now you can add up to 500 IPs or IP ranges without any impact on redirect speed.
  4. Our main goal of this update is a release of CLICK API. So now you can send your visitors directly to your landing pages and see all stats in our dashboard. We don't use javascript and img-pixels, because it's slow and leads to traffic losses. We offer you S2S integration with your landing pages. This feature isn't only make it possible to track visits without redirect and any codes but do split-tests, filter bots and cloak. We've published manual and php library (you are free to use any language) in our docs section.
We also got a lot of questions about how fast our reporting is if you send tens or hundreds millions of clicks. We are 100% sure to say that it is much faster than the solution you are currently using. Some videos are going to be published to prove it, but it's free now and you can try it yourself.

Got more questions or suggestions?

Please don't hesitate to reach out to our 24/7 support team!
 
Hi there!​

When you work on optimization of campaigns it is important to have a clear strategy for obtaining a stable result, and not act "by sight". For example, you should disable segments that don't give any conversion from a certain number of visits, but how to choose this number? There is always a risk that you will block a good segment that could bring you a lot of profit in the future. It's important to be able to assess this risk. This update is aimed at giving our users a set of tools for a statistically valid assessment of campaign indicators. This functionality is a set of indicators and doesn't require you to have a degree in mathematics.

First of all, to start using the Statbox, you need to go to Account Settings and put the checkbox next to Statbox. Then in dropdown choose one of the four values of the accuracy of the assessment: 80%, 90%, 95% and 99%. This indicator should be selected based on your traffic source and your test budget.

pp.png
For example, if you choose an accuracy of 90%, then the probability of error will be 10%. Would like to note:

  1. With an error rate of 10%, you will lose, in the worst case, 10% of good segments. In practice, this percentage is usually less and, acting on this strategy, you will be less likely than in 10% of cases to disable profitable segments.
  2. The higher the selected accuracy, the more traffic you will need to evaluate the error. In practice, accuracy in 80% and 90% works well.
po.png
After that, in the Stats section you'll see the following columns:

  1. est. CR - estimated CR based on selected precision rate.
  2. est. EPV - estimated EPV based on selected precision rate.
  3. est. ROI - estimated ROI based on selected precision rate.
  4. PO (profit opportunity) - this indicator characterizes the probability for this segment to be profitable with the chosen accuracy and has three possible values:
    • green - the segment is profitable.
    • yellow - the segment is unprofitable, but has chances to be profitable.
    • red - the segment is unprofitable and will remain so with a given probability. This segment should be disabled.
    It should be noted that this indicator is calculated only if offer payout is indicated (in the case of Auto Payout Average payout is indicated) as well as price of clicks (or automatically transferred from traffic source). Otherwise the indicator will be gray.

Example:
Suppose we have an offer with a payout of $ 10, and the click cost is $ 0.5.
If the segment doesn't have conversions, the indicator will change from yellow to red depending on the configured accuracy when the following number of visits is reached:
80% - 31 visits
90% - 45 visits
95% - 58 visits
99% - 90 visits
The example above shows how the indicator works when you have little data to analyze. When you have a lot of visits and conversions, the indicator works even better.
 
Hi there!

We're rolling out our new functionality. This release is about number of things, but the one we're most excited about is javascript event tracking. We got a lot of feedback from all of you, and working with all of our dev team to make changes based on what we hear.

So what's new?

Now you have an ability using javascript pixel to track users' behavior, identify bots, track javascript events and display parameters on a landing pages.
Just go to campaign links, setup everything properly on your landing page and enjoy new parameters for analysis in our reports.

For your convenience we've reworked our "Edit columns" sections, so now you can customize columns (their names and order) with ease and even save these sets for future use.
new_edit_columns.png


When it's done there are several options you can use:

  1. To track visits, clicks and conversions without redirects via our links and setting up postback.
    Example:
    You have campaign with one landing page and two offers. Because of traffic source policies you can't use our redirects.

    Copy pixel code and paste it in the landing page header. Select "Visits", copy code for visit and paste it in the body of the landing page. Use /click URL for clicks as usual. So now when user visits your page you'll see all visits in our dashboard.

    javascript_code_visit.png

    Don't use redirects and javascript visit code simultaneously, otherwise visit code will always rewrite cookies.

  2. To track javascript events. We've added some predefined events for you (scroll, mouse movement, time on page and etc.). You can also use your custom code and pass event using "event" method.

    Example:
    You work with native ads and want to track some behavior events (like page scrolls and time spent on site more then 20 seconds) to filter out bad site_ids. To do it go and select "Scroll" and "Time on page", choose delay 20 seconds and add provided peaces of code to the landing page.

    javascript_sc_code.png

    Go and set up columns like this

    selected_columns.png

    Enjoy new levels of analytics in your reports.

  3. To display get parameters on a landing page.

    Example:
    Let's say you redirect visitors to your landing page and pass additional parameters like http: //your-landing-page.com?city_token={city}

    To display any parameter just add this peace of code: <script>document.write(might.getUrlParameter('city_token'))</script>
 
Quick update. HTTPS is live

We're rolling out our first version of secure links. Now you can use HTTP and HTTPS links.
We've added settings to add certificate for custom domain also.

ssl.png

Once certificate is added you can use HTTP and HTTPS links whenever you want.
 
Last edited:
Hi,

I am currently testing Might.io, I understand that you are new and in beta stage but do you have any social media presence? also where are you located?

Thanks,
 
Your tracker click url wzj7mk . mighttrack . com/click is indicating unsafe site by chrome and firefox browser. this will bounce users off your offers. What are you people doing about it
 
Your tracker click url wzj7mk . mighttrack . com/click is indicating unsafe site by chrome and firefox browser. this will bounce users off your offers. What are you people doing about it
Hi! We recommend to use custom domains especially if you run black offers. You can change redirect domain in campaign settings. Also we're almost ready for the update that helps you never have such kind of issues.
 
Last edited:
banners
Back